Little Sensor, Lotsa $$$
"I finally bit the bullet, got tired of turning off the beep beep alarm and ordered a new sensor for my water filter system…. and voila! the alarm quit beeping! It cost $500 but the new sensor was worth it!"
VIQUA 650580 UV Sensor for G, H, J, K, PRO10, PRO20, PRO30
Q&As
VIQUA 650580 UV Sensor for G, H, J, K, PRO10, PRO20, PRO30
Q&As
Part Number:
650580
Alt Part Number:
602899
UV sensor monitors lamp output to ensure proper ultraviolet disinfection performance in VIQUA systems.
Read More
IN STOCK
Description
Genuine VIQUA 650580 UV sensor designed for G, H, J, K, PRO10, PRO20, and PRO30 systems. Monitors UV lamp output and system status to support proper operation. Direct OEM replacement ensures accurate monitoring and full system compatibility.
The VIQUA 650580 UV sensor isdesigned for select VIQUA commercial and residential systems. It measures ultraviolet lamp output and communicates with the controller to confirm proper operation. This sensor helps operators identify declining lamp performance, supports maintenance planning, and ensures the system continues operating within manufacturer specifications.
Specs
- Comparable with TROJAN-UV-MAX-650580
- Accurately monitors ultraviolet exposure
- Monitors when it is time to replace UV lamp
Features
This Item Fits These Select Systems
Overall rating: 4.125 / 5 from 8 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["shipping","communication"].
Review highlights
Reviews
Little Sensor, Lotsa $$$
"I finally bit the bullet, got tired of turning off the beep beep alarm and ordered a new sensor for my water filter system…. and voila! the alarm quit beeping! It cost $500 but the new sensor was worth it!"
Quick repalcements!
"obtained UV sensor and bulb fast without issue"
Great Company to Deal With
"Great communication and shipping was fast - thank you."
No more reliable than old style
"I can't even count how many of these I've had to replace, young ones. Really hoped the newer style would last, but failed again in less than 2 years. And these things aren't cheap. Need to find a whole new filter system, as this is an expensive weak point in the design."
New style no more reliable
"These things are expensive, but don't last long. Replacing it again, hoped this newer style would be an improvement. But died again in less than 2 years. Huge weakness in this filter's design."
great transaction
"great transaction"
UV sensor replacement
"Correct sensor, perfect fit, no problems for Viqua Pro 10 UV light chamber."
Excellent service
"A perfect transaction; professionally handled."
Q&A
Q:
What does the VIQUA 650580 sensor monitor?
A:
It monitors UV intensity in compatible VIQUA systems so the controller can report operating conditions.
Q:
Which systems use the 650580 sensor?
A:
The catalog lists these compatible parts or systems: PRO10, PRO20, PRO30, UVMAX PRO10, UVMAX PRO20, UVMAX PRO30, UVMAX PRO50, UVMax G Plus, UVMax H Plus, UVMax J Plus, UVMax K Plus, H+ (650652), K+ (660002-R), PRO10 (650647), PRO20 (650653), PRO24-100 (660095-R), PRO24-186 (660086-R), PRO30 (650659), PRO50 (660003-R). Confirm the exact model number on your equipment before ordering VIQUA 650580 sensor.
Q:
Is this sensor the same as a UV lamp?
A:
No. The sensor measures system output; it does not generate UV energy and does not replace the annual lamp service part.
Q:
Can sleeve buildup cause a low sensor reading?
A:
Yes. Mineral film on the sleeve or sensor window, lamp age, water conditions, or component alignment can affect the reading. Follow the manual before assuming the sensor failed.
Q:
What should be inspected before replacing the sensor?
A:
Check lamp age, sleeve condition, sensor window, cable and connector seating, controller messages, and the approved troubleshooting sequence.
Q:
Why should the exact 650580 part number be used?
A:
Sensor calibration and electrical connections are system-specific; a visually similar sensor may not provide the correct signal or fit.
