Excellent
"Prompt service and easy to find products!"
Luminor RLQ-330HO Lamp and Sleeve for LBH4-101, LBH5-101
Q&As
Luminor RLQ-330HO Lamp and Sleeve for LBH4-101, LBH5-101
Q&As
Part Number:
RLQ-330HO
Kit includes the genuine RL-330HO lamp, RQ-330 sleeve, install key, and O-rings for BLACKCOMB-HO -101 systems.
Read More
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
IN STOCK
Description
The Luminor RLQ-330HO UV Lamp and Sleeve Kit pairs a genuine RL-330HO UV lamp with its matched RQ-330 quartz sleeve, an installation key, and replacement O-rings for a leak-tight reseal after service.
The RL-330HO lamp is rated for 10,000 hours of service (about 12 months of continuous operation), and Luminor recommends replacing the quartz sleeve every 24 months. Replacing both together keeps UV output consistent and takes the guesswork out of maintenance timing. For step-by-step instructions, see our guides on how to replace a UV lamp and how to clean a UV sleeve.
Why a genuine Luminor lamp and sleeve kit matters
Luminor's UV water treatment systems are tested and certified as a complete unit — lamp, chamber, and sleeve together. Genuine Luminor parts keep your system performing the way it was certified; a non-Luminor lamp or sleeve can void that certification and affect your warranty coverage if an issue comes up later.
Fits these Luminor BLACKCOMB-HO and Contractor Series systems
- LBH4-101
- LBH5-101
- LBH6-101
- LBH5-101B (NSF Class B, non-monitored)
- LBH6-101B (NSF Class B, non-monitored)
- LBH6-101A (NSF Class A, monitored, includes UV sensor)
- LBC4-101 (Contractor Series, 10 GPM)
- LBC5-101 (Contractor Series, 10 GPM)
All eight models share the same "-101" rating and use the identical RL-330HO lamp and RQ-330 sleeve. The A and B suffixes mark the system's NSF/ANSI 55 monitoring class — not a different lamp or sleeve.
Auqasana Replacement: The LUMINOR RLQ-330HO kit includes the RL-330HO lamp and RQ-330 quartz sleeve engineered for the Aquasana AQ-UV-10C system.
Specs
- Includes RL-330HO and RQ-330
- Replace lamp every 12 months
- Replace sleeve every 24 months or as needed
Features
This Item Fits These Select Systems
Helpful Info & Downloads
Downloads
Overall rating: 5.0 / 5 from 1 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].
Review highlights
Reviews
Excellent
"Prompt service and easy to find products!"
Q&A
Q:
What is the Luminor RLQ-330HO UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB-HO UV water treatment systems, including a genuine RL-330HO UV lamp, RQ-330 quartz sleeve, installation key, and replacement O-rings.
Q:
Why does this kit include O-rings?
A:
The RLQ-330HO is one of the few Luminor kits that ships with O-rings alongside the lamp and sleeve, so you have a fresh, leak-tight seal ready to go when you reassemble the chamber after service — no need to order them separately.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-330HO lamp and RQ-330 quartz sleeve are each available on their own — though note the O-rings only ship with this kit, not with the standalone lamp.
Q:
My system alarm says "Lamp Incorrect" — what does that mean?
A:
This alarm means the installed lamp doesn't match what the system expects — worth checking closely on this SKU since it spans several compatible systems (BLACKCOMB-HO, Contractor Series, and Aquasana). Compare the part number on the lamp key to the label on the chamber — if they don't match, install the correct lamp. If the numbers do match and the alarm continues, contact Luminor support for further assistance.
