Luminor RLQ-950HO Lamp and Sleeve for LBH4-401, LBH5-401
Luminor RLQ-950HO Lamp and Sleeve for LBH4-401, LBH5-401
Subscription Details
Automatic deliveries and charges at your selected frequency. Skip, reschedule, or cancel through your subscription account. View subscription details.
Description
The Luminor RLQ-950HO UV Lamp and Sleeve Kit pairs a genuine RL-950HO UV lamp with its matched RQ-950 quartz sleeve and an installation key.
The RL-950HO lamp is rated for 10,000 hours of service (about 12 months of continuous operation), and Luminor recommends replacing the quartz sleeve every 24 months. Replacing both together keeps UV output consistent and takes the guesswork out of maintenance timing. For step-by-step instructions, see our guides on how to replace a UV lamp and how to clean a UV sleeve.
Why a genuine Luminor lamp and sleeve kit matters
Luminor's UV water treatment systems are tested and certified as a complete unit — lamp, chamber, and sleeve together. Genuine Luminor parts keep your system performing the way it was certified; a non-Luminor lamp or sleeve can void that certification and affect your warranty coverage if an issue comes up later.
Fits these Luminor BLACKCOMB-HO systems
- LBH4-401
- LBH5-401
- LBH6-401
- LBH5-401B (NSF Class B, non-monitored)
- LBH6-401B (NSF Class B, non-monitored)
- LBH6-401A (NSF Class A, monitored, includes UV sensor)
- LBH4-401-50 (low-UVT crossover)
- LBH5-401-50 (low-UVT crossover)
- LBH6-401-50 (low-UVT crossover)
- Includes RL-950HO and RQ-950
- Replace lamp every 12 months
- Replace sleeve every 24 months or as needed
Helpful Info & Downloads
Q:
What is the Luminor RLQ-950HO UV Lamp and Sleeve Kit?
A:
It's a matched replacement kit for Luminor BLACKCOMB-HO UV water treatment systems, including a genuine RL-950HO UV lamp, RQ-950 quartz sleeve, and installation key.
Q:
What's the difference between "-401" and "-402" systems?
A:
Nothing about the lamp or sleeve — the digit marks the electrical service the system runs on, 110V ("-401") versus 230V ("-402"). Both use the identical RL-950HO lamp and RQ-950 sleeve in this kit.
Q:
Can I order the lamp and sleeve separately instead of as a kit?
A:
Yes. If only one part needs replacing, the RL-950HO lamp and RQ-950 quartz sleeve are each available on their own. The RLQ-950HO kit is for when you're replacing both at once, which is the recommended approach since both wear parts age together.
Q:
Does this kit work with the LBH4/5/6-401-TOC systems?
A:
No — TOC variants use a different lamp, the RL-950HO-TOC, even though they share the same RQ-950 sleeve as the systems in this kit's fitment list. Contact us if you need to source a lamp for a TOC system.
Q:
My system alarm says "Connection Failure" — what does that mean?
A:
This alarm usually means a module, sensor, or lamp key isn't securely connected, or a connection port is dirty or damaged. Unplug the controller, check that all connections (including the lamp key) are secure, then wait a minute before plugging it back in. If the alarm continues, contact Luminor support for further assistance.
