VIQUA RN-001/1 Bottom Retaining Nut for SQ, VH, VT, VP
Replacement VIQUA Sterilight Bottom Retaining Nut RN-001/1 with plug for the VIQUA/Sterilight SQ/SSM/SC/SCM/SP/SPV/VT/VH/VP Series and is made of Noryl Plastic.
Overall rating: 4.5555553 / 5 from 9 reviews.
Review topics: ["order","process"].
"I had placed an order I did however receive what I ordered but it was missing a small little piece. I sent them an email and they had the whole new part with plastic piece sent to my house very quickly cant think them enough!"
"The whole process from purchasing the nut and the nut fitting perfect was very good. I will purchase from ESP again. Big help !!!"
"I was very pleased with the interaction with your service representative. My order was processed promptly and received a day ahead of promised delivery. Very satisfied with the experience!"
"Wasted money it didn't fit"
"decent price and fit right"
"Item was just as expected. Was easy to order and easy to get. Showed up quicker than expected.'"
"Looks good, won't know for sure until annual maintenance in April."
"works great!"
"the right parts"
Q:
What is the VIQUA RN-001/1 used for?
A:
RN-001/1 is the bottom retaining nut with plug used in approved VIQUA chamber assemblies, including the cataloged S2Q-OZ application. It secures the lower quartz-sleeve hardware.
Q:
Is RN-001/1 the same as the RN-001 top retaining nut?
A:
No. RN-001/1 is the bottom nut and includes the plug; RN-001 is the top retaining nut. The two positions have different hardware requirements, so order by the exact part number.
Q:
Will RN-001/1 fit every SQ, VH, VT or VP system?
A:
Not necessarily. Similar VIQUA families can use different chamber generations and retaining hardware. The current catalog fit mapping specifically identifies S2Q-OZ, so verify RN-001/1 in the exact system parts list for any other model.
Q:
Does the retaining nut include the sleeve O-ring?
A:
Do not assume the seal is included. The nut-with-plug assembly and the model-specific O-ring are separate service items unless the package contents explicitly state otherwise.
Q:
How should RN-001/1 be installed?
A:
Disconnect power, shut off water, relieve pressure and allow the chamber to cool. Inspect the sleeve and O-ring, thread the nut squarely by hand and tighten only to the manual's specification.
Q:
Why might water leak near the bottom retaining nut?
A:
Common causes include a damaged or misplaced O-ring, debris on the sealing surface, a cracked sleeve, cross-threading or incorrect nut fit. Depressurize the system and inspect those parts rather than simply overtightening the nut.
