Reverse Osmosis Systems

Rayne Clear 3-Stage RO Compatible Replacement Filters

This 3 stage RO system uses a sediment pre-filter to reduce sediment particles before the membrane filters out impurities larger than .001 microns. The GAC post filter treats for taste and odor. You can find and order all your compatible filters at once in our replacement kits below.Please Note: Standard Rayne/Microline systems use standard Microline filters which are available below. Newer Rayne/Microline systems use pre and post filters designated with "RC". Such as S7028-RC. If your system requires the "RC" filters, the standard Rayne/Microline Filters we offer will not fit. Please look at the owners manual that you received with your system. If your manual shows the part numbers S7011, S7028, and S7025 without the "RC", the filters listed below will fit your system.

Replacement Filter Info

Sediment Filter (S7011) - Replace every 6-12 months or as needed

RO Membrane TFC 14 GPD (S1224RS) – Replace every 36 months or as needed

Carbon Block Filter (S7025) – Replace every 6 months or as needed

Helpful Filter Information

Not all filters have the same replacement schedule. Replace the RO membrane filter every two years. Replace all other filters every 6-12 months. Help keep your system sanitary by never using filters longer than 12 months, except the RO membrane filter, regardless of how much water you use.

Filter Replacement Schedule

We’ve taken the guesswork out of replacing your filters. Begin a filter replacement cycle by replacing all filters on your system (Filter Kit "YSM"). The following year, or sooner if recommended by the manufacturer, replace all filters except the RO membrane (Filter Kit "YS"). Repeat this cycle by following the helpful diagram below.